Rektangul?ra och kvadratiska stansar och motl?gg g?r det enkelt att stansa h?l i rostfritt st?l (V2A-versioner), mjukt st?l, aluminium eller plast med max. Pl?t tjocklek 2 mm. Finns f?r
Finns f?r utsk?rningsstorlekar av 10, 16 och 24-flerstifts industriella kontakter och ?ven f?r m?nga specialutsk?rningar. Stansarna ?r d?rf?r l?mpliga f?r de flesta icotek-kabelgenomf?ringssystem. Stansarna ?r endast f?r handhydraulisk drift.
De passar ihop med handhydraulisk punchverktyg fr?n icotek och ?ven med andra tillverkare.
I leveransen ing?r:
| Material | St?l, h?rdat och f?rbr?nt |
| ArtNr. | 80053 |
| EAN | 4251269316289 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 112 × 36 mm |
| L?mplig f?r: | KEL-ER 24, KEL 24, KEL-U 24, KEL-FA 24, KEL-FG A, KEL-FG-ER A, KEL-QUICK 24, KEL-QTA 24, KEL-BES 24, KEL-BES-S 24, KEL-DPZ 24, KEL-DPU 24, KEL-DPU-HD 24, KEL-DP 24 |
| F?r utsk?rning av kontakt | 24-pin |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80153 |
| EAN | 4251269316456 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 112 × 36 mm |
| L?mplig f?r: | KEL-ER 24, KEL 24, KEL-U 24, KEL-FA 24, KEL-FG A, KEL-FG-ER A, KEL-QUICK 24, KEL-QTA 24, KEL-BES 24, KEL-BES-S 24, KEL-DPZ 24, KEL-DPU 24, KEL-DPU-HD 24, KEL-DP 24 |
| F?r utsk?rning av kontakt | 24-pin |
| Stansbart material | Rostfritt st?l V2A |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80054 |
| EAN | 4251269316296 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 112 × 46 mm |
| L?mplig f?r: | KEL-ER 24, KEL 24, KEL-U 24, KEL-FA 24, KEL-FG A, KEL-FG-ER A, KEL-QUICK 24, KEL-BES 24, KEL-BES-S 24, KEL-DPZ 24, KEL-DPU 24, KEL-DPU-HD 24 |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80154 |
| EAN | 4251269316463 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 112 × 46 mm |
| L?mplig f?r: | KEL-ER 24, KEL 24, KEL-U 24, KEL-FA 24, KEL-FG A, KEL-FG-ER A, KEL-QUICK 24, KEL-BES 24, KEL-BES-S 24, KEL-DPZ 24, KEL-DPU 24, KEL-DPU-HD 24 |
| Stansbart material | Rostfritt st?l V2A |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80101 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 112 × 56 mm |
| L?mplig f?r: | KEA 24 W90 S, KEA 24 W90 R |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80225 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 112 × 56 mm |
| L?mplig f?r: | KEA 24 W90 S, KEA 24 W90 R |
| Stansbart material | Rostfritt st?l V2A |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80061 |
| EAN | 4251269318757 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 112 × 66 mm |
| L?mplig f?r: | KEL 24-E |
| F?r utsk?rning av kontakt | 32-pin |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| ArtNr. | 80052 |
| EAN | 4251269316272 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 86 × 36 mm |
| L?mplig f?r: | KEL-ER 16, KEL 16, KEL-U 16, KEL-FA 16, KEL-QUICK 16, KEL-BES 16, KEL-BES-S 16, KEL-DPZ 16, KEL-DP 16 |
| F?r utsk?rning av kontakt | 16-pin |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80152 |
| EAN | 4251269316449 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 86 × 36 mm |
| L?mplig f?r: | KEL-ER 16, KEL 16, KEL-U 16, KEL-FA 16, KEL-QUICK 16, KEL-BES 16, KEL-BES-S 16, KEL-DPZ 16, KEL-DP 16 |
| F?r utsk?rning av kontakt | 16-pin |
| Stansbart material | Rostfritt st?l V2A |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80051 |
| EAN | 4251269316265 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 65 × 36 mm |
| L?mplig f?r: | KEL-ER 10, KEL 10, KEL-U 10, KEL-FA 10, KEL-QUICK 10, KEL-QTA 10, KEL-BES 10, KEL-BES-S 10, KEL-DPZ 10, KEL-DP 10 |
| F?r utsk?rning av kontakt | 10-pin |
| Stansbart material | Mild steel (St), Plast |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80151 |
| EAN | 4251269316432 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 65 × 36 mm |
| L?mplig f?r: | KEL-ER 10, KEL 10, KEL-U 10, KEL-FA 10, KEL-QUICK 10, KEL-QTA 10, KEL-BES 10, KEL-BES-S 10, KEL-DPZ 10, KEL-DP 10 |
| F?r utsk?rning av kontakt | 10-pin |
| Stansbart material | Rostfritt st?l V2A |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80062 |
| EAN | 4251269319013 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 52 × 36 mm |
| L?mplig f?r: | KEL-DPZ 6, KEL-DP 6 |
| F?r utsk?rning av kontakt | 6-pin |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80149 |
| EAN | 4251269321542 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 52 × 36 mm |
| L?mplig f?r: | KEL-DPZ 6, KEL-DP 6 |
| F?r utsk?rning av kontakt | 6-pin |
| Stansbart material | Rostfritt st?l V2A |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80049 |
| EAN | 4251269331831 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 46 × 46 mm |
| L?mplig f?r: | KEL-ER-B, KEL-B, KEL-U-B, KEL-FG-B, KEL-FG-ER-B, KEL-QUICK-B, KEL-QTA-B, KEL-DPZ-B |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80050 |
| EAN | 4251269316258 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 46 × 46 mm |
| L?mplig f?r: | KEL-ER-B, KEL-B, KEL-U-B, KEL-FG-B, KEL-FG-ER-B, KEL-QUICK-B, KEL-QTA-B, KEL-DPZ-B |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| ArtNr. | 80150 |
| EAN | 4251269316425 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 46 × 46 mm |
| L?mplig f?r: | KEL-ER-B, KEL-B, KEL-U-B, KEL-FG-B, KEL-FG-ER-B, KEL-QUICK-B, KEL-QTA-B, KEL-DPZ-B |
| Stansbart material | Rostfritt st?l V2A |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| ArtNr. | 80058 |
| EAN | 4251269316333 |
| Antal | 1 |
| Number of centre punches | 2 |
| Utsk?rning | 112 × 24 mm |
| L?mplig f?r: | KEL-ER-E5, KEL-E5, KEL-FG-E5, KEL-FG-ER-E5, KEL-QUICK-E5, KEL-FL 4 |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80226 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80057 |
| EAN | 4251269316326 |
| Antal | 1 |
| Number of centre punches | 2 |
| Utsk?rning | 86 × 24 mm |
| L?mplig f?r: | KEL-ER-E4, KEL-E4, KEL-QUICK-E4, KEL-FL 3 |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80226 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80056 |
| EAN | 4251269316319 |
| Antal | 1 |
| Number of centre punches | 2 |
| Utsk?rning | 65 × 24 mm |
| L?mplig f?r: | KEL-ER-E3, KEL-E3, KEL-FG-E3, KEL-FG-ER-E3, KEL-QUICK-E3, KEL-FL 2 |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80226 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80055 |
| EAN | 4251269316302 |
| Antal | 1 |
| Number of centre punches | 2 |
| Utsk?rning | 43 × 24 mm |
| L?mplig f?r: | KEL-ER-E2, KEL-E2, KEL-FG-E2, KEL-FG-ER-E2, KEL-QUICK-E2, KEL-FL 1 |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80226 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80075 |
| EAN | 4251269332517 |
| Antal | 1 |
| Number of centre punches | 2 |
| Utsk?rning | 21 × 27 mm |
| L?mplig f?r: | KEL-E1 |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80205 |
| L?smutter | 80227 |
| ArtNr. | 80086 |
| EAN | 4251269336171 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 138 × 138 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80213 |
| L?smutter | 80214 |
| ArtNr. | 80094 |
| EAN | 4251269336256 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 68 × 138 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80213 |
| L?smutter | 80214 |
| ArtNr. | 80063 |
| EAN | 4251269322709 |
| Antal | 1 |
| Number of centre punches | - |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80213 |
| L?smutter | 80214 |
| ArtNr. | 80060 |
| EAN | 4251269318252 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 92 × 92 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| ArtNr. | 80093 |
| EAN | 4251269336249 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 46 × 92 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| ArtNr. | 80092 |
| EAN | 4251269336232 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 45 × 92 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| ArtNr. | 80066 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 91 × 117 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| ArtNr. | 80224 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 73 × 24 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80226 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80161 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 71 × 29 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80226 |
| L?smutter | 80211 |
| ArtNr. | 80064 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 68 × 68 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| ArtNr. | 80074 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 65 × 113 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| ArtNr. | 80085 |
| EAN | 4251269336164 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 50.8 × 50.8 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80209 |
| L?smutter | 80211 |
| ArtNr. | 80091 |
| EAN | 4251269336225 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 25 × 50 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80231 |
| L?smutter | 80227 |
| ArtNr. | 80159 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 32 × 90 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80226 |
| L?smutter | 80211 |
| ArtNr. | 80084 |
| EAN | 4251269336157 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 25.4 × 25.4 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80205 |
| L?smutter | 80227 |
| ArtNr. | 80223 |
| Antal | 1 |
| Number of centre punches | 4 |
| Utsk?rning | 24 × 57 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80226 |
| L?smutter | 80211 |
| Suitable centre punches | 80065 |
| ArtNr. | 80083 |
| EAN | 4251269336140 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 24 × 24 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80205 |
| L?smutter | 80227 |
| ArtNr. | 80067 |
| Antal | 1 |
| Number of centre punches | 2 |
| Utsk?rning | 22.2 × 22.2 mm |
| F?r utsk?rning av kontakt | HAN 3A |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80205 |
| L?smutter | 80227 |
| Suitable centre punches | 80232 |
| ArtNr. | 80073 |
| Antal | 1 |
| Number of centre punches | - |
| F?r utsk?rning av kontakt | SUB-D9 |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80228 |
| L?smutter | 80229 |
| ArtNr. | 80059 |
| EAN | 4251269319174 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 22 × 45 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80205 |
| L?smutter | 80227 |
| ArtNr. | 80089 |
| EAN | 4251269336201 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 22 × 42 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80205 |
| L?smutter | 80227 |
| ArtNr. | 80088 |
| EAN | 4251269336195 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 22 × 30 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80205 |
| L?smutter | 80227 |
| ArtNr. | 80082 |
| EAN | 4251269336133 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 21.3 × 21.3 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80205 |
| L?smutter | 80227 |
| ArtNr. | 80081 |
| EAN | 4251269336126 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 19.1 × 19.1 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80205 |
| L?smutter | 80227 |
| ArtNr. | 80087 |
| EAN | 4251269336188 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 17 × 19 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80228 |
| L?smutter | 80229 |
| ArtNr. | 80222 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 16.4 × 15.3 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80228 |
| L?smutter | 80229 |
| ArtNr. | 80080 |
| EAN | 4251269336119 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 15.8 × 15.8 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80228 |
| L?smutter | 80229 |
| ArtNr. | 80220 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 15.4 × 14.5 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80228 |
| L?smutter | 80229 |
| ArtNr. | 80079 |
| EAN | 4251269336102 |
| Antal | 1 |
| Number of centre punches | - |
| Utsk?rning | 12.7 × 12.7 mm |
| Stansbart material | Plast, Mild steel (St) |
| Max. v?ggtjocklek | 2 mm |
| Hydraulskruv | 80228 |
| L?smutter | 80229 |
| ArtNr. | 80205 |
| Antal | 1 |
| Diameter D1 | 13 mm |
| Diameter D2 | 11 mm |
| L?ngd | 105 mm |
| ArtNr. | 80209 |
| Antal | 1 |
| Diameter D1 | 19 mm |
| L?ngd | 135 mm |
| ArtNr. | 80213 |
| Antal | 1 |
| Diameter D1 | 28,3 mm |
| Diameter D2 | 25 mm |
| L?ngd | 155 mm |
| ArtNr. | 80226 |
| EAN | 4251269336263 |
| Antal | 1 |
| Diameter D1 | 19 mm |
| Diameter D2 | 14 mm |
| L?ngd | 130 mm |
| ArtNr. | 80228 |
| EAN | 4251269336287 |
| Antal | 1 |
| Diameter D1 | 9,5 mm |
| Diameter D2 | 8,25 mm |
| L?ngd | 105 mm |
| ArtNr. | 80231 |
| EAN | 4251269336317 |
| Antal | 1 |
| Diameter D1 | 16 mm |
| Diameter D2 | 14,5 mm |
| L?ngd | 110 mm |
| ArtNr. | 80206 |
| Antal | 1 |
| Tr?d | 1/2 UNF |
| ArtNr. | 80211 |
| Antal | 1 |
| Tr?d | 3/4 UNF |
| ArtNr. | 80229 |
| EAN | 4251269336294 |
| Antal | 1 |
| Tr?d | 3/8 UNF |
| ArtNr. | 80214 |
| Antal | 1 |
| ArtNr. | 80204 |
| Antal | 1 |
?vertyga dig sj?lv om den enkla och tidsbesparande monteringen av v?ra produkter.
Kolla in monteringsvideon!
Hitta alltid r?tt ram och genomf?ringar f?r din kabelgenomf?ring!
Hydraulisk punch f?r h?ltagning i V2A rostfritt st?l, pl?t, aluminium eller plast. L?mplig f?r runda och rektangul?ra h?ltagningar. Finns ocks? med knockout-munstycke.
KT-insatsbaserade kabelgenomf?ringsramar f?r verktygl?st montage.
KT-insatsbaserad kabelgenomf?ring med standardh?ltagning f?r industrikontakter. Finns som enkel- eller dubbelradig.
KT-insatsbaserad kabelgenomf?ring med standardh?ltagning f?r industrikontakter. Finns som enkel- eller dubbelradig.
Klassisk mitt-delad KT-insatsbaserad kabelgenomf?ring. H?ltagning enligt industristandard. Finns som enkel- eller dubbelradig
KT-insatsbaserad fl?nshus f?r dirigering av f?rkontakterade kablar i 90 ° vinkel till kapslingsv?ggen. Finns som enkel- eller dubbelradig.
KT-insatsbaserad fl?nshus f?r dirigering av f?rkontakterade kablar i 90 ° vinkel till kapslingsv?ggen. Finns som enkel- eller dubbelradig.
KT/FT-insatsbaserad kabelgenomf?ringsramar f?r flatkablar samt f?rkontakterade runda kablar.
Det modul?ra gr?nssnittsystemet (MIS) ?r en delbar kabeling?ng f?r kablar med eller utan kontakt i kombination med industrikontakter 3A eller 4A.
QT-insatsbaserade kabelgenomf?ringsramar f?r verktygl?st montage. Finns som enkel- eller dubbelradig.
QT-insatsbaserade Kabelgenomf?ringsplattor gjort av elastomer f?r kablar med eller utan kontakt. "snap in"-montering.
Verktygsl?st "snap-in"-montage f?r KEL, KEL-U och KEL-QUICK.
Robust genomf?ringsplatta / multifl?ns med h?g dragavlastning och certifierad skyddsklass upp till IP68/UL typ 4X*.
Robust hygienisk genomf?ringsplatta med h?g dragavlastning och certifierad skyddsklass upp till IP68.
Genomf?ringsplatta / multifl?ns med h?g kabelt?thet och certifierad skyddsklass upp till IP66/UL typ 12. Finns i varierade storlekar.
Genomf?ringsplatta / multifl?ns med pyramidformade membran, skyddsklass upp till IP66. Finns i olika storlekar.
Genomf?ringsplatta / multifl?ns med h?g kabelt?thet och certifierad skyddsklass upp till IP65. Kablar kan dras igenom fr?n b?da sidor.
Genomf?ringsplatta / multifl?ns med h?g kabelt?thet f?r verktygsl?s montering. Certifierad skyddsklass IP64 /UL typ 12.
Passar h?ltagningar med samma dimensioner som standardiserade industrikontakter.
Passar h?ltagningar med samma dimensioner som standardiserade industrikontakter.
KEA ?r en multifunktionell adapter f?r olika kabelgenomf?ringssystem. Adaptern g?r att kablar kan dras i 90° vinkel och t?tas med upp till IP66.
Hydraulisk punch f?r h?ltagning i V2A rostfritt st?l, pl?t, aluminium eller plast. L?mplig f?r runda och rektangul?ra h?ltagningar. Finns ocks? med knockout-munstycke.
Metrisk punch f?r h?ltagning M16 - M85 och PG 16. L?mplig f?r kabelf?rskruvningar och runda genomf?ringsplattor.
Upps?ttning av runda punchar f?r h?ltagningar M16 - M63. L?mplig f?r kabelf?rskruvningar och runda genomf?ringsplattor.
These punches can be used to punch the special cut-out shapes for the CONFiX? bulkhead fittings. Available for steel, aluminium and stainless steel.
These punches can be used to punch the special cut-out shapes for the KEL-FW bulkhead fittings. Available for steel, aluminium and stainless steel.
Tack vare en optimal kraft?verf?ring kan du med enkelhet kapa DIN-profiler, jordskenor och naj/plintskenor med gradfria raka snitt. Moth?llet och m?ttlinjalen (1 m) ger ?nskad l?ngd med millimeterprecision.
Skruvnycklar SW 85 och SW 100 f?r M75 och M85 hexagonala l?smuttrar. Monteringsverktyg f?r KEL-DPF.
