In enclosures and housings with a high degree of protection, temperature differences result in condensation. By using a drainage device, it is possible to safely drain off the condensate without losing a maximum enclosure protection of IP66. A water-permeable membrane ensures the drainage of the enclosure due to its capillary effect. The design prevents splash water from entering the interior of the enclosure.
The drainage device is fixed in the bottom of the enclosure using the union nut in a hole of ? 50.5 +0.5 mm. Make sure that the sealing ring is on the outer housing wall and that the hole is free of burrs.
| IP rating (EN 60529) | IP66, IP69K |
| Operating temperature | -45 C° to 70 C° |
| Mounting options | Fasten with locknut |
| Part No. | 99193 |
| EAN | 4251269324789 |
| Package quantity | 1 |
| Mounting options | Fasten with locknut |
| Length | 49.5 mm |
| Width | 60 mm |
| Height | 60 mm |
| Mounting height | 28.5 mm |
| Cut-out size, round | 50.5 mm |
| Thread | M50 × 1,5 |
| Water permeability (5 mm water column) | 200 ml/h |
Pressure compensation element with metric thread to avoid water condensation in highly sealed enclosures (IP68)
Self-adhesive foamed PUR seal for individual applications.
icotek offers a one-sided self-adhesive sealing tape for enclosure base plates.
Ground straps manufactured with highly flexible E-Cu stranded wires. Available in a variety of lengths and cross-sections.
Wrenches SW 85 and SW 100 for M75 and M85 hexagonal plastic locknuts. Mounting tool for KEL-DPF / DB Distribution Box.